Sanan Chip Epistar 3014 Smd Led Natural White 10-14 Lm 4000 - 4500K For Led Light

Product Details:
Place of Origin: SHENZHEN
Brand Name: Yuhang
Certification: CE.SGS.ROHS
Model Number: YH3014NW01
Delivery Time: 5-7 work days
Payment Terms: T/T, Western Union,Paypal
Supply Ability: 8KK/Days

Detailed Product Description

Type:	smd led	Chip Material:	InGaN
Emitting Color:	Natural White	Luminous Intensity:	Customers' Requirements
Luminous Flux(lm):	10-12LM	Power:	0.1W
Viewing Angle(°):	120 Degree	Color Rendering Index:	80
Color Temperature:	4000-4500K	Operating Temperature:	-20 - 85
Chip Brand:	Epistar Chip, Sanan Chip,Epileds Chip	Current:	30mA
Voltage:	3.0-3.4V	Warranty:	2 Years
Lifespan:	50000-100000H

Epistar and sanan chip smd 3014 led natural white 0.1w 10-14lm 4000-4500K datasheet for led light

Product Information
item name	0.1W 3014 SMD LED
Power	0.1W
voltage	2.9-3.3V
Current	30ma
CRI	80
Life span	50000hours
Warranty	2 years
Beam angle	120 degree

color	luminous flux	CCT(K)	CRI	voltage
warm white	10-12lm	2800-3300	80	2.9-3.1V
natural white		4000-4500		2.9-3.1V
daylight white		5000-5500 6000-6500		2.9-3.1V
cool white		>7000K		2.9-3.1V

Product Description

Sanan Chip Epistar 3014 Smd Led Natural White 10-14 Lm 4000 - 4500K For Led Light

Product features:

1.High Lumens Output & Low Brightness Decay
2.Stable Performance & Great CCT Inity.
3.Wid Color Temperature Range
4.High CRI More Than 80

Product quality:

1. First-Choice for Indoor Ligting
2. Good raw materials
3. Copper layer
4. Gold wire connection

5.San'an chips
6. Lifespan is >50 000 hours easily

SURFACE MOUNT LED LAMPS
Product Type:YH3014NW
Absolute maximum ratings (Ta=25°C)
Parameter			Symbol			Value			Unit
Forward current			If			30			mA
Reverse voltage			Vr			5			V
Power dissipation			Pd			100			MW
Operating temperature range			Top			-25~+80			°C
Storage temperature range			Tstg			-30~+85			°C
Peak pulsing current(1/8 duty f=1KHz)			Ifp			50			mA
Junction Temperature			Tj			115			℃/W
Electrostatic Discharge(HBM)			ESD			1000			V
Electro-Optical characteristics (TA=25°C)
Parameter	Test Condition	Symbol		Color	Value					Unit
					Min		Typ	Max
Color Temperature	IF=30mA	CCT		NW	4000		--	4500		K
Forward voltage	IF=30mA	Vf		NW	3.0		--	3.6		V
luminous flux	IF=30mA	φ		NW	10		--	14		LM
Viewing angle at 50% IV	IF=30mA	2θ1/2		NW	--		120	--		Deg
Dominant wavelength	IF=30mA	λd		--	--		--	--		nm
Reverse current	Vr=5V	Ir		NW	--		5	--		μA
Color Rendering Index	IF=30mA	CRI		--	--		80	--		Ra

Sanan Chip Epistar 3014 Smd Led Natural White 10-14 Lm 4000 - 4500K For Led Light

Reel Dimensions:

Carrier Tape Dimensions:

Loaded quantity 4000 PCS Per reel.

Please read the following notes before using the product:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

Application field

Are widely used in the LED lamp, LED bulb light, LED panel light, LED ceiling lamp, LED street light, LED lamp, miner's lamp, stage light, flashlight, lighting, lamp lighting lamps and lanterns, as well as outdoor billboards, such as electronic display, traffic lights, signs, car tail lights, LED modules, LCD back light, LED lighting lighting, LED soft/hard light bar, etc., is the better choice to replace traditional lighting light source.

PREVIOUS：Cool White 3014 SMD LED White 3.0 - 3.4 V 50000 - 100000 H Lifespan NEXT：PLCC4 Bi Color Smd Led Chip 3528 0.06 Watt White / Warm White Emitting Color